Patriot Exhaust H1070 Chrome Side Pipes w/Mufflers, 70 Inch, PR

Description

Dimensions measure 70" in length with a inlet diameter of 2" and outlet diameter of 3", Black painted mufflers guarantee performance and produce a distinctive power tone, Full 360° rotation feature on both inlet and outlet pipes, Heat shields are 56.00" long, Kickout and inlet are adjustable for the angle
Patriot Exhaust H1070 Chrome Side Pipes w/Mufflers, 70 Inch, PR
Sku # 91013470
Mfr. Part # H1070
Condition
New
Brand
Patriot Exhaust
Sold
Pair
Details
Notes
These side exhausts come unassembled. The front portion with the 90 degree bend is chrome along with the rear turn out section. The center section is satin black finish and is expanded at one end and swedged at the other for assembly. The chrome plated heat shield clamps onto the center section which also houses the non-removable muffler/baffle assembly.
NOTE: Each measurement is taken from tip of elbow to exhaust tip.
Info
Give your vehicle that custom look with a classic chrome shielded side exhaust system. Large 2-1/4" I.D. chrome inlet, 3" O.D. chrome outlet pipes and low back pressure six-sided louvered core painted black mufflers guarantee performance and produce a distinctive power tone. Complete installation flexibility is built in with the full 360° rotation feature on both inlet and outlet pipes. Includes mounting hardware.
Not legal for sale or use in California on pollution controlled motor vehicles.
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
Specs
Material Type
Steel
Sold in Quantity
Pair
Finish
Chrome
Notes
Heat shields are 56.00" long. Kickout and inlet are adjustable for the angle.
Hardware Included
Yes
Bracket Included
Yes
Tube O.D.
3.00
Overall Length
70
MFG. Part #
H1070
Inlet Diameter
2.00
Outlet Diameter
3.00
Reviews
would purchase for next AMX
Rated
by jon on April 21, 2021
Summary:
installed on 1973 Javelin
Yes, I recommend this product.
Chrome side pipes 70" long
Rated
by Kevin on February 14, 2021
Summary:
These appear to be well made and are heavy wall steel construction with all the clamps and brackets to assemble. The only thing you need is to fit the inlet to your header collector and clamp or weld in position.
Yes, I recommend this product.
Good pipes
Rated
by Fabio on October 18, 2020
Summary:
I put these pipes on a 82 el camino. Vsry easy to assemble and mount. Came with instructions and all parts. Very happy overall .
Cons:
Packaging could have been better,
Pros:
Cheapest side pies I found
Yes, I recommend this product.
Great Pipes / Poor Directions for muffler direction
Rated
by Dan on July 23, 2020
Summary:
Directions arent clear which direction to install the muffers ,and pipes are made so they fit both ways , I installed boht ways just to hear the difference and there is a difference , install with exhaust flowing into the opening of loovers inside muffler
Yes, I recommend this product.
Yes great product
Rated
by Tweetie on May 26, 2020
Summary:
Easy to install
Pros:
Looks great
Yes, I recommend this product.
Related Items / Suggested Parts
Patriot Exhaust H1060 Chrome Side Pipes w/Mufflers, 60 Inch, PR
Patriot Exhaust H1080 Chrome Side Pipes w/Mufflers, 80 Inch, PR
Patriot Exhaust H7402 Side Exhaust Universal Hookup Kit
Patriot Exhaust H7454 Heat Shield Chrome, 70/80 Inch
Patriot Exhaust H3954 Side Exhaust Replacement Muffler For H1070/H1080
Patriot Exhaust H7432 Side Exhaust Outlet, 3 Inch
Speedway 2-1/2 Inch Side Pipe Exhaust Hook-Up Kit
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.